Igor Kromin |   Consultant. Coder. Blogger. Tinkerer. Gamer.

I've put together all the STLs and SCAD files that I used for the 3D Printer Box and posted them on Thingiverse, free of charge. Hopefully these will be of some use to others.

12mm inset washers
http://www.thingiverse.com/thing:100930
washer_preview_featured.jpg



Portabee Z-axis stabiliser
http://www.thingiverse.com/thing:100929
z_stabiliser_preview_featured.jpg





1/8" 25mm bolt covers
http://www.thingiverse.com/thing:100928
bolt_cover_preview_featured.jpg



100mm exhaust pipe window adapter
http://www.thingiverse.com/thing:100927
window_exhaust_preview_featured.jpg



60mm corner frame pieces
http://www.thingiverse.com/thing:100926
corner_door_preview_featured.jpg



120mm long cable guide
http://www.thingiverse.com/thing:100924
cable_guide_preview_featured.jpg



120mm fan exhaust hood to 100mm exhaust piping
http://www.thingiverse.com/thing:100923
fan_exhaust_preview_featured.jpg



Z-axis center clamp for Portabee 3D printer
http://www.thingiverse.com/thing:100922
clamp_preview_featured.jpg



20mm aluminium corner cover piece
http://www.thingiverse.com/thing:100921
corner_preview_featured.jpg



120mm Biohazard fan grille
http://www.thingiverse.com/thing:100920
fan_grille_preview_featured.jpg



-i

A quick disclaimer...

Although I put in a great effort into researching all the topics I cover, mistakes can happen. Use of any information from my blog posts should be at own risk and I do not hold any liability towards any information misuse or damages caused by following any of my posts.

All content and opinions expressed on this Blog are my own and do not represent the opinions of my employer (Oracle). Use of any information contained in this blog post/article is subject to this disclaimer.
, ,
Hi! You can search my blog here ⤵
NOTE: (2022) This Blog is no longer maintained and I will not be answering any emails or comments.

I am now focusing on Atari Gamer.
© 2012 - 2022 IgorKromin.net — Terms & Conditions | Privacy Policy